Design, Fabricate, Assemble, Test and Deliver Three (3) Special purpose motorized,
self-leveling, height adjusting lifting attachments (TMSC - Straddle Carrier)
for Naval Sea Command - Indian Head at Naval Weapons Station Yorktown, Yorktown,
Virginia.
Design, Fabricate, Assemble, Test and Deliver Three (3) Special purpose lifting
motorized, self-leveling, height adjusting attachments (TMCG - C-Grab) for Naval
Sea Command - Indian Head at Naval Weapons Station Yorktown, Yorktown, Virginia.
Design, Fabricate, Assemble, Deliver, Install and Test Six (6) 7.5 Ton Indoor
Underrunning Electric Double Girder Cranes with Six (6) specialized rotating
& leveling 4 point pick up lifting beams; six (6) transfer sections and
six (6) runways with electrification for US Navy at Naval Weapons Station Yorktown.
Provide engineering support for fabrication of one (1) 151.2T Portal crane and
up to twenty (20) 60T Portal cranes for Samsung Heavy Industries - South Korea,
for Various Us Naval Shipyards.
Complete Engineering Design of One (1) 151.2T and up to twenty (20) 60T Portal
Cranes with adjustable wheel spans (from 18’-40’ rail gauges) for Samsung Heavy
Industries - South Korea for various US Navy Shipyards.
Complete on-site engineering inspection services for one (1) 300T; one (1) 150T;
& one (1) 15T portal crane for Bath Iron Works (Maine) on location at SPMP
shipyards in and around Shanghai China for a period of 18 months.
Engineering review of ZPMC’s design and calculations for two (2) 50 Long-Ton
Container Cranes for Terminal Systems Inc. - Delta Port and one (1) 50 Long-Ton
Container Crane for Terminal Systems Inc. -Vanterm.
Engineering review and Certification of Airline Maintenance Docking Ramp for
AGSE
Engineering inspection and Re-Certification of passenger gangway for Vancouver
Port Authority
Design, Fabrication, Installation and Testing of a Microdrive for Slew Drive
of 30T Portal Crane - DND Canada at CFB Esquimalt, Esquimalt BC
Finite Element Fatigue Analysis of 30T crane and graving dock at Public Works
Shipyard - Esquimalt BC, for Public Works & Government Services Canada
Design, Fabricate, Assemble, Test and Deliver One (1) High Capacity special
purpose lifting attachment (TMSC - Straddle Carrier) for US Navy at Naval Weapons
Station EARLE, Colts Neck, New Jersey.
Design, Fabricate, Assemble and Deliver One (1) 300 Ton Lifting Beam for WPH
(Harnischfeger) Crane Services - San Francisco, CA.
Design, Fabricate, Assemble, Deliver, Install and Test Four (4) Twin hook 5
Ton Indoor Underrunning Electric Double Girder Cranes with 4 transfer sections
and 4 runways with electrification for US Navy at Port Hadlock, WA.
Design, Fabricate, Assemble, Deliver, Install and Test special purpose hook
attachments (C-Grab & Straddle Carrier) for US Navy at Port Hadlock, WA.
Design of a 9/2.8 Ton Jetty Crane for the Department of National Defense - Canada
at CFB Halifax.
Design of a 10T Gantry Crane for San Bernardino Tunnel, Intake Reconstruction.
Design of a 50T Gate Hoist for San Bernardino Tunnel, Intake Reconstruction.
Design of a 165 Tonne Bridge Powerhouse Crane for BC Hydro
Design of a 15 Tonne Tailrace Gantry Crane for BC Hydro
Design and supply of 11 monospiral cablereels to U.S. Army Engineer Corps for
rehabilitation project on Mississippi river.
Peer review of ZPMC’s design and calculations for four (4) 50 Long-Ton Container
Cranes for Vancouver Port Corporation - Delta Port.
Design of a 50 Ton Gantry Crane for the U.S. Army, Corps of Engineers, for
Second Powerhouse, Bonneville Dam, Washington/Oregon. The crane was manufactured
by Westmont Industries Inc. of Santa Fe Springs California.
Design of 60/10 Ton Bridge Cranes for the U.S. Navy. The cranes are presently
being manufactured by Westmont Industries Inc. of Santa Fe Springs California.
Design of 25 Ton Bridge Cranes for the U.S. Navy. The cranes are presently being
manufactured by Westmont Industries Inc. of Santa Fe Springs California.
Design of ten (10) 60 Long-Ton Portal Cranes for the U.S. Navy - manufactured
by Westmont Industries Inc. of Santa Fe Springs, California.
Design of two (2) 20 Long-Ton Portal Dry Dock Cranes for the U.S. Navy Shipyard
in San Diego. The cranes were manufactured by Westmont Industries Inc. of Santa
Fe Springs California.
Design of two (2) Diesel-electric 20 Long-Ton Portal Dry Dock Cranes for the
U.S. Navy Shipyard in Guam. The cranes were manufactured by Westmont Industries
Inc. of Santa Fe Springs California.
Design and QA of a 540 Ton/Hr Ship Unloader for Formosa Plastic, Taiwan. Crane
built by ZPMC in Shanghai and commissioned in August 1995.
Development, design and supply of Rack & Pinion Manlifts for Log Handling
cranes.
Design of two (2) Jib Portal Cranes for the Martin Marietta "Atlas IV"
Project. These cranes were manufactured by Westmont Industries Inc. of Santa
Fe Springs California.
Design of a 30/5 Tonne Level Luffing Crane (Dockyard Crane) for the Department
of National Defense, Canada. The crane was manufactured by Ebco Industries Ltd.
of Richmond, B.C.
Development and design of a Manlift with 800 feet of vertical lift for B.C.
Hydro.
Upgrade of two (2) 210 Tonne E.O.T. Cranes for B.C. Hydro.
Assisted Shanghai-Zhenhua Port Machinery Company (ZPMC-China) with the conceptual
design of a 50 Long-Ton Container Crane for the Port of Vancouver.
Design of eight (8) 100 Long-Ton Barge Cranes for the U.S. Navy. These cranes
were manufactured by Westmont Industries Inc. of Santa Fe Springs, California.
Upgrade of two (2) 500 Tonne E.O.T. Cranes for B.C. Hydro.
Design of a 500 Ton/hr Ship Unloader for Lake Charles Carbon Co. This crane
was built by Kranco of Houston.
Design of five (5) 100 Long-Ton Barge Cranes for the U.S. Navy. The cranes
were manufactured by Westmont Industries Inc. of Santa Fe Springs, California.
Design of six (6) - 25 Ton Capacity Portal Cranes for U.S. Navy dockyard submarine
bases at Bangor, Washington and Kings Bay, Georgia. The cranes were manufactured
by Westmont Industries Inc. of Santa Fe Springs, California.
Design of a 100 Long-Ton Portal Crane for U.S. Navy dockyard at Mare Island
Naval Shipyard, Vallejo, California. The crane was manufactured by Westmont
Industries Inc. of Santa Fe Springs, California.
Design and supply of a 20 Ton Portal Crane for EBCO Industries.
Development, design and erection of two (2) Manlifts with 1200 feet of vertical
lift for the CPR tunnel at Rogers Pass, B.C. The system was manufactured by
Ebco Industries Ltd. of Richmond, B.C.
Structural, mechanical, hydraulic and electrical design and drafting of Passenger
Ship Gangways for the cruise ship facility at Worldport, Port of Los Angeles.
This system was manufactured by Westmont Industries Inc. of Santa Fe Springs,
California.
Design and supply of a Radio Telescope Traveling Antenna Tower for Dominion
Radio Astrophysical Observatory, Penticton, B.C. The system was manufactured
by Ebco Industries Ltd. of Richmond, B.C.
Design and supply of the Pedestrian Walkway for the Annacis Bridge. The system
was manufactured by Ebco Industries Ltd. of Richmond, B.C.
Development and design of a 30 Tonne Level Luffing Crane (Dockyard Crane) for
the Department of Public Works, Canada. This crane was manufactured by Ebco
Industries Ltd. of Richmond, B.C. where Kanlift’s bid was successful in direct
competition with four of the world's largest crane engineering firms (KRUP-Germany,
P&H Harnischfeger-U.S., KONE- Finland, and FAVCO-Australia).
Development, design and supply of two (2) Container Handling Systems for the
Food Process and Research Facility, Richmond B.C. The system was manufactured
by Ebco Industries Ltd. of Richmond, B.C.
Mechanical, hydraulic and electrical design and drafting of four (4) Passenger
Ship Gangways for the cruise ship facilities at Canada Place, Port of Vancouver.
The system was manufactured by Ebco Industries Ltd.of Richmond, B.C.